- Jutze-AOI, SPI & Laser Marking
- Machinery
- X-Ray and BGA Rework Station
- Robotics
- Equipment
- Consumables & Others
SM-8150N Multi-Function Cleaning Machine
Previous | 7 / 15 | Next |
- smt cleaning machine
- pcb cleaning machine
- scraper cleaning machine
- electronics manufacturing machine
The machine consists of a cleaning system, rinsing system, drying system and filtration system.The machine use electricity and compressed air as energy, manually put the stencil /PCBA into the cleaning room, by touch screen set parameters of the cleaning, rinsing, drying and other related, press the start button, the stencil will be automatically cleaned, rinsed and dried.Automatically stop operation when the set cleaning process is finished and reset to achieve the next workflow.The machine is very convenient for cleaning stencils , improve production efficiency and quality.It belongs to a new type, high performance automatic cleaning equipment.The equipment uses water-based liquid cleaning agent and DI water for rinsing, without any safety risks, and no harm to personnel
-
¡ôHigh Pressure Spraying System for Cleaning Stencil with Water-based Cleaning Fluid
¡ôDouble liquid tank, equipped with heating system, implementation needs cleaning-rinsing-drying
¡ôCleaning process: cleaning - chemical isolation - rinsing (open loop/closed loop) - drying.
¡ôPreparation of advanced automatic touch screen operating software, Program parameters can be saved, Easy to use
¡ôThe counting function of the system can automatically accumulate the number of cleaning stencils and the number of circulating filters
¡ôLiquid and the pump pressure can be displayed through the panel pressure gauge, feedback the equipment running status in time
¡ôSpray pressure is monitored by pressure sensor. If the pressure range is set, the alarm will be given
¡ôDirect reflux of liquid to reduce liquid consumption
¡ôIntegral stainless steel body, strong and durable, resistant to acid, alkali cleaning fluid, etc
¡ôRinse water can be filtered by ion to achieve long time zero discharge
¡ôHigh-pressure fan + hot air drying, drying effect faster and thorough
¡ôLower operating costs, only 50-120 ml of liquid is needed for each cleaning. After cleaning, compressed air is used to recover pipeline and pump residual liquid, which can reduce liquid consumption by 50%
Dimension£¨mm£©
L1300*W1400*H1850
Applicable stencil size £¨mm£©
L740 *W740 * H40(max)
Special size to be customizedPower supply
AC380V 50HZ
Total power
30KW
Gas source
0.4¡«0.7Mpa
Source of water
0.2¡«0.4Mpa
Exhaust port
Ø125
Cleaning/Rinsing liquid tank volume
42L*2PCS£¨max£©
Optimum liquid usage
35L*2PCS
Cleaning fluid isolation time
40S
Clean time
3¡«8Min
Rinse time
3¡«10Min
Dry time
3¡«10Min
Cleaning and rinsing methods
Left and right movable high pressure
liquid spray cleaning
Drying method
High pressure hot air shearing
(optional super type)
times of rinsing
1-99 times (settable)
Cleaning liquid recovery filtration
Filtration of 5 microns
(filtering microorganisms: red gum and contaminants)
Rinsing liquid discharge filtration
Filtration of 5 microns
(filtering microorganisms: red gum and contaminants)
Liquid heating temperature
Room Temperature to 60 ¡æ
DI Water Supply
30¡«60L/min
DI Water Pressure
0.2--0.4Mpa
DI Water Access Connection Pipeline
3/4 inches
noise
Less than50 decibels
Net Machine Weight
550Kg